Satel INTEGRA Plus Spécifications télécharger pdf (Page 14)

12 ETHM-1 SATEL

command at once (if the AUTHORIZATION REQUIRED option is enabled, authorization by

means of a code will be necessary).

Fig. 8. DLOADX program: macro commands programmed for MOBILEKPD2 PRO application.

n be assigned to a macro command. It

ed mode;

ns;

itions;

tputs;

d outputs;

Command – control panel executed function which ca

can be:

 arming selected partitions in a specifi

 disarming selected partitio

 clearing alarm in selected part

 inhibiting selected zones;

 unbypassing selected zones;

 activating selected outputs;

 deactivating selected ou

 changing status of selecte

sending KNX telegram;

sending key sequences.

The partitions must be controlled by user code.

The zones must not have the BYPASS DISABLED option enabled.

The outputs



must be the 24. MONO SWITCH, 25. BI SWITCH, 105. SHUTTER UP,

106. SHUTTER DOWN or REMOTE SWITCH type (they need not be assigned to any group

of outputs).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Satel INTEGRA Plus Spécifications Page 14