Satel SATELLINE-EASy Guide de l'utilisateur télécharger pdf (Page 50)

SATELLINE-EASy Pro

User Guide v.1.5

Now all of the modifications of the example have been performed and the new values are

displayed:

***** SATELLINE *****

FW: 06.18.x.xx / HW: SPL0005d+EPT / PV: 05.00 / IM: 05 / S/N: YYMMxxxx

-------------------------------------------------------------------------------

Current settings

----------------

1) Radio frequency TX: 468.50000 MHz / RX: 437.00000 MHz /

Ref freq: 460.00000 MHz / Spacing 12.5kHz

2) Radio settings TX power 35W / Signal threshold -110 dBm / FCS OFF /

TX start delay 0ms / Compatibility Satel 3AS / Call sign OFF

3) Addressing RX address ON 0020/0000 / TX address OFF /

RX address to RS port OFF / TX address autoswitch OFF

4) Serial port 1 ON / 19200 bit/s / 7 bit data / Even parity /

2 stop bit

5) Serial port 2 OFF / 9600 bit/s / 8 bit data / None parity /

1 stop bit (TTL)

6) Handshaking CTS Clear to send / CD RSSI-threshold /

RTS Ignored / Pause length 3 bytes

7) Additional setup Error correction OFF / Error check OFF / Repeater OFF /

SL-commands ON / Priority TX / Full CRC16 check OFF /

User Data whitening OFF

8) Routing OFF

9) Tests OFF

A) Restore factory settings

B) Info

E) EXIT and save settings

Q) QUIT without saving

Enter selection >

Press E for Exiting and saving.

The settings of the serial port must be modified to correspond with the settings of the terminal

device that is to be connected to the radio modem.

9.2.10 Modification of handshaking functions

Handshaking related configuration settings can be modified by selecting the options from the

main menu ”6”. In the following example characteristics of the CTS-line (CLEAR TO SEND  TX

BUFFER STATE), CD-line (RSSI-THRESHOLD  DATA ON CHANNEL) and RTS-line (IGNORED

 FLOW CONTROL) are changed.

NOTE!

It should be noted that switching the radio modem into Programming Mode by connecting the

MODE-pin (see chapter 6.2) to ground (GND) will change the settings of serial PORT 1 to

”9600,8,N,1” automatically irrespective of the serial PORT 1 DATA-mode settings.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 103 104

Commentaires sur ces manuels

Pas de commentaire

Satel SATELLINE-EASy Guide de l'utilisateur Page 50

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Satel SATELLINE-EASy