Satel INTEGRA Plus Spécifications télécharger pdf (Page 41)

SATEL INTEGRA Plus 39

12. 3EOL/NO – the zone supports a detector of NO type with three EOL resistors in the

circuit.

Sensitivity – depending on wiring type:

NO, NC, EOL, 2EOL/NC, 2EOL/NO, 3EOL/NC and 3EOL/NO – the time during which the

zone must be violated, so that it can be noted by the control panel.

Roller / Roller 2EOL – 2 parameters are to be programmed:

Pulses duration – the time period during which a specified number of pulses must

occur (P

ULSES COUNT

) for the zone to be violated. You can program the following

values: 30 s, 120 s, 240 s and 0. Having programmed the value 0 means that the

pulses will be counted the whole time when the zone is armed (the pulse counter will

only be reset at arming/disarming).

Pulses count – the number of pulses after which the zone will be violated. You can

program values from 1 to 8.

Vibration / Vibration 2EOL – 2 parameters are to be programmed:

Sensitivity – occurrence of a pulse whose duration is equal to or longer than the

defined time will cause violation of the zone. You can program values from the 3 ms

to 96 ms range (every 3 ms).

Pulses count – the number of pulses after which the zone will be violated. You can

program values from 0 to 7. If the value 0 is programmed, the pulses will not be

counted – only S

ENSITIVITY

will be taken into account.

In the keypad, depending on the wiring type, different functions are available to allow

programming the sensitivity related parameters. In the D

LOAD

X program, all

parameters can be programmed in the S

ENSITIVITY

field.

Fig. 5. Example of zone settings in the D

LOAD

X program.

Output – refers to the F

OLLOW OUTPUT

wiring type. Indicate the number of output whose

activation will violate the zone. The output can be a virtual one.

Max. violation time / Max. door opening time – exceeding the maximum time of

violation/door opening is recognized by the control panel as a detector failure/door failure.

If the value 0 is programmed, control of this time is disabled.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 81 82

Pas de commentaire

Satel INTEGRA Plus Spécifications Page 41