Satel INTEGRA Plus Spécifications télécharger pdf (Page 64)

62 Programming SATEL

The service code need not be preceded by a suitable prefix – it is enough when the

number of digits preceding the code matches the prefix length.

RTC c lock is inadequate,

the clock s

corr

per

onnected.

the D

LOAD

Int

lock correction [Clock adjustm.] – if the accuracy of control panel c

ettings may be adjusted once per 24 hours (at midnight) by a defined time. The

ection time is programmed in seconds. The maximum correction can be ±19 seconds

24 hours.

Summer/winter time [Daylight saving] – the control panel can automatically adjust the clock

settings due to a change from the summer time to the winter time according to the

selected schedule.

Summer time from – if the control panel clock is to be corrected by 1 or 2 hours according to

dates, you should enter the dates (day, month) after the clock is changed to the summer

time (moved forward).

inter time from – if the control panel clocW k is to be corrected by 1 or 2 hours according to

dates, you should enter the dates (day, month) after the clock is changed to the winter

time (moved back).

me server – if the conTi trol panel is to synchronize the time with the server (automatically

and after suitable function is enabled by the installer or master user), enter the address of

time server supporting the NTP protocol. Time synchronization is possible when the

ETHM-1 module is c

Do not report time server trouble [No t.serv.trbl] – with this option enabled, no trouble will

be reported if there is no communication with the time server.

me zone – if the control panel is to synchronize the time with the server, indicate the time

zone, i.e. the difference between the universal time (GMT) and the zone time.

PING test – the ETHM-1 modules with firmware version 1.05 (or later) can test

communications by using the PING command sent to the indicated network device. The

ETHM-1 module will be testing communication after the parameters described below are

configured and the PING

TEST

option is enabled in the module itself. In

program, you can program the PING test parameters in the "Structure" window,

"Hardware" tab, after you click on the keypad bus.

Address to test [PING] – address of the device to which the module is to send the PING

command to test communications. It can be entered as an IP address (4 decimal

numbers separated by dots) or as a name.

Period [PING period] – the interval between consecutive communication tests by using the

PING command. If value 0 is programmed, the communication test will be disabled.

ies no. before trouble [PING tries] – the number of unsuccessful communication tests

(the module has received no answer to the PING command sent) after which trouble will

be reported. If value 0 is programmed, the communication test will be disabled.

ration encryption key [Integrate key] – if the ETHM-1 module is used for integratioeg n of

the control panel with other systems and the communication over Ethernet network is to be

crypted, enter the key with which the data will be encrypted: up to 12 alphanumeric

aracters.

8 Default user's authority level

Yo which user rights will be automatically assigned to a new user. The list of

permissions can be modified during user creating or editing.

u can define

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 81 82

Commentaires sur ces manuels

Pas de commentaire

Satel INTEGRA Plus Spécifications Page 64

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Satel INTEGRA Plus