Satel INTEGRA Plus Spécifications télécharger pdf (Page 44)

42 Programming SATEL

61. T

ECHNICAL

–

GSM

LINK TROUBLE

– intended for control of the external GSM

communication module. Violation of the zone will cause a trouble condition.

62. T

ECHNICAL

–

OVERLOAD

– intended for control of an additional power supply unit used

together with the control unit. Violation of the zone will cause a trouble condition.

63. T

ROUBLE

– violation of the zone will cause a trouble condition.

64...79 B

YPASSING

–

GROUP

1–16 – violation of this type of zone can bypass a group

of zones (see: B

YPASSES

p. 45).

80. A

RMING

– violation of the zone will arm the partition to which the zone belongs.

Additionally, you can select a group of partitions which will also be armed (see: G

ROUPS OF

PARTITIONS

p. 46).

81. D

ISARMING

– violation of the zone will disarm the partition to which the zone belongs.

Additionally, you can select a group of partitions which will also be disarmed (see: G

ROUPS

OF PARTITIONS

p. 46).

82. A

ISARM

– the zone controls the arming status of the partition it belongs to.

The control mode depends on the C

ONTROL BY PULSE

option. Disarming may

simultaneously clear the alarm and cancel the messaging.

83. C

LEARING ALARM

– violation of the zone will clear alarm in the selected group of partitions

(see: G

ROUPS OF PARTITIONS

p. 46) or the partition to which the zone belongs, and can also

cancel messaging.

84. G

UARD

– violation of the zone is recognized as recording the guard's round in the partition

to which the zone belongs.

85. E

NTRY

XIT

–

CONDITIONAL

– similarly as the 0. E

NTRY

XIT

type with an extra feature: the

zone becomes an instant one upon arming, if no partition exit is registered upon starting

the arming procedure.

86. E

NTRY

XIT

–

FINAL

– similarly as the 0. E

NTRY

XIT

, but the zone restore during exit delay

countdown will terminate the exit delay countdown and arm the system.

87. E

XIT

–

FINAL

– similarly as the 6. E

XIT

, but the zone restore during exit delay countdown

will terminate the exit delay countdown and arm the system.

88. 24

H BURGLARY

– a permanently armed zone. Its violation will cause the burglary alarm.

89. F

INISHING EXIT DELAY

– zone violation will reduce the partition exit delay time. It is possible

to program a shorter exit delay time. If this value remains not programmed, the exit time

will be reduced to 4 seconds from the zone violation. There will be no effect if the zone is

violated and the just running exit delay is shorter than that programmed for the zone.

90. D

ISABLING VERIFICATION

– zone violation will disable verification of alarms in the partition.

All alarms will be unverified until next arming.

91. D

ETECTOR MASK

– the permanently armed zone, dedicated to anti-masking control.

Violation of the zone will be treated by the control panel as detector trouble (masking).

92. O

UTPUTS GROUP OFF

– the zone allows to deactivate a selected group of outputs.

93. O

UTPUTS GROUP

ON – the zone allows to activate a selected group of outputs.

3.3.6 Zone options

Power up delay – when the option is enabled, the zone will be bypassed for 120 sec. after

power-up (which prevents triggering alarms e.g. when starting the alarm control panel).

Priority – when this option is enabled, arming will be impossible, if the zone is violated (e.g.

windows have been left open, etc.).

Violation control – option for 82. A

ISARM

zone type. If it is enabled, violation of the zone

will arm/disarm the partition (depending on the current status of the partition). If the option

is disabled, zone violation will arm, and the zone restore will disarm the partition.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 81 82

Commentaires sur ces manuels

Pas de commentaire

Satel INTEGRA Plus Spécifications Page 44

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Satel INTEGRA Plus