Satel INTEGRA Plus Spécifications Page 67
- Page / 82
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
SATEL INTEGRA Plus 65
Alarms – you can define which alarms will be triggered from the keypad:
– fire – pressing the
key for approx. 3 seconds.
– panic – pressing the key for approx. 3 seconds.
– auxiliary [medical] – pressing the key for approx. 3 seconds.
– 3 wrong codes – entering invalid access codes three times.
Silent PANIC alarm [Silent panic] – with this option enabled, pressing the key for approx.
3 seconds will trigger the silent panic alarm.
Sign. entry delay [Entry time s.] – with this option enabled, the keypad will audibly signal the
entry delay countdown.
Sign. exit delay [Exit time sig.] – with this option enabled, the keypad will audibly signal the
exit delay countdown.
Sign. alarms [Alarm signal.] – with this option enabled, the keypad will signal the alarms
audibly.
Key sounds [Key sounds] – with this option enabled, pressing the keypad keys is confirmed
by beeps.
Sign. trbl. in part. arm [Trbl.in p.arm.] – with this option enabled, the keypad signals troubles
by means of the
LED, if some of the operated partitions are armed (the troubles are
not signaled if all partitions are armed).
Sign. new trouble [New trbl.sign.] – with this option enabled, the keypad can audibly signal
the occurrence of a new trouble (if the T
ROUBLE MEMORY UNTIL REVIEW
option is enabled).
New trouble signaling is cleared after the troubles have been reviewed by the user.
Show code entering [Show code ent.] – with this option enabled, entering the code is
presented on the keypad display by asterisks.
Show keypad name [Name (2nd row)] – with this option enabled, the keypad name is
presented in the lower line of the display.
Exit delay clearing enable [Fin.exit time] – with this option enabled, the exit delay time in
partitions with the E
XIT DELAY CLEARING
option enabled can be shortened after pressing in
turn the 9
keys.
Show viol. zones [Zone violation] – with this option enabled, violating the CHIME signal
triggering zone result additionally in the zone name being displayed.
Auto-Arm delay countdown [Auto-arm delay] – with this option enabled, the auto-arm delay
countdown in partition is signaled acoustically.
Signal on wrong card [Unkn.card sig.] – option available for the INT-KLCDR and INT-KLFR
keypads. If enabled, reading in an unknown card will be signaled by two long beeps.
Event after 3 readings [Ev.3 unk.cards] – option available for the INT-KLCDR and
INT-KLFR keypads. If enabled, reading in an unknown card three times will save the
event.
Alarm after 3 readings [Al.3 unk.cards] – the option is available, if the E
VENT AFTER
3
READINGS
option is enabled. When enabled, reading in an unknown card three times will
trigger an alarm.
Displ. mode switching [Dspl.mode chg.] – with the option enabled, you can toggle the
display between the standby mode and the partition status display mode by using the 9
key.
Show disarm messages [Show disarming] – if this option is enabled, the keypad will inform
about disarming with a displayed message at all times. If the option is disabled – only in
case of disarming from the given keypad.
Show arm messages [Show arm] – if this option is enabled, the keypad will inform about
arming with a displayed message (irrespective of how the system was armed).
- PROGRAMMING 1
- 2 Programming SATEL 4
- SATEL INTEGRA Plus 3 5
- 1. General 6
- 2. Programming options 6
- 2.1.5 Service mode menu 7
- 6 Programming SATEL 8
- SATEL INTEGRA Plus 7 9
- 8 Programming SATEL 10
- SATEL INTEGRA Plus 9 11
- [n – counter number] 11
- SATEL INTEGRA Plus 11 13
- [n – identifier number] 13
- 12 Programming SATEL 14
- SATEL INTEGRA Plus 13 15
- 14 Programming SATEL 16
- SATEL INTEGRA Plus 15 17
- 16 Programming SATEL 18
- SATEL INTEGRA Plus 17 19
- (only INT-S and INT-SK) 19
- (only INT-SCR) 19
- [n – number of output] 19
- 18 Programming SATEL 20
- SATEL INTEGRA Plus 19 21
- (does not apply to CA-64 DR) 21
- 20 Programming SATEL 22
- SATEL INTEGRA Plus 21 23
- 22 Programming SATEL 24
- 2.2 DLOADX program 25
- 24 Programming SATEL 26
- SATEL INTEGRA Plus 25 27
- 26 Programming SATEL 28
- program 29
- 28 Programming SATEL 30
- SATEL INTEGRA Plus 29 31
- LOADX program 32
- Configuring the GSM module 33
- Initiating a connection 33
- 3. System structure 34
- 3.2.3 Partition parameters 35
- Partition type 36
- Options 37
- 3.3 Zones 38
- 3.3.3 Programming the zones 39
- 3.3.4 Zone parameters 39
- 38 Programming SATEL 40
- SATEL INTEGRA Plus 39 41
- 3.3.5 Zone types 42
- SATEL INTEGRA Plus 41 43
- 3.3.6 Zone options 44
- SATEL INTEGRA Plus 43 45
- 44 Programming SATEL 46
- 3.3.7 Counters 47
- 3.3.8 Bypasses 47
- 4. Outputs 48
- 4.1 Output parameters 49
- 4.2 Output functions 49
- 48 Programming SATEL 50
- SATEL INTEGRA Plus 49 51
- 50 Programming SATEL 52
- SATEL INTEGRA Plus 51 53
- 4.3 Options 54
- 4.4 Output triggering 54
- 4.6 Output disabling 55
- 4.8 Output groups 56
- 4.9 Output state indicating 57
- 4.11 Output testing 57
- 5. System options 58
- 5.2 Printer options 59
- 5.3 Other options 60
- SATEL INTEGRA Plus 59 61
- 4 Arming options 62
- Times 5.5 63
- 5. r parameters 63
- 62 Programming SATEL 64
- 6. Programming the keypads 65
- 64 Programming SATEL 66
- SATEL INTEGRA Plus 65 67
- 66 Programming SATEL 68
- 7. Timers 69
- 8. User schedules 70
- 9. Reporting 70
- SATEL INTEGRA Plus 69 71
- 9.1.2 Advanced options 72
- Identifiers 73
- SIA / TELIM prefix 74
- Events assignment 74
- 9.1.4 SIA-IP 74
- 9.1.6 Event codes 74
- 9.2 Starting the reporting 75
- 9.2.3 GPRS reporting 76
- 10. Messaging 77
- 76 Programming SATEL 78
- 10.2.1 Events assignment 79
- 78 Programming SATEL 80
- SATEL INTEGRA Plus 79 81
- 13. Manual update history 82
Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Satel INTEGRA Plus
(27 pages)ReliOn Prime manuals
Owner’s manuals and user’s guides for Unknown ReliOn Prime.
We providing 1 pdf manuals ReliOn Prime for download free by document types: Instruction Manual
Table of contents
CAUTION:
2
WARNING:
16
Meter Set Up
18
20
21
21
1 2 3 4 5
24
Contact Bars
27
INCORRECT
28
IMPORTANT!
34
IMPORTANT
36
METER MEMORY
54
WARRANTY
69
Manual de
71
CUIDADO:
72
INTRODUCCIÓN
76
Uso previsto
77
ADVERTENCIA:
86
CORRECTO
98
INCORRECTO
98
IMPORTANTE
104
200-300
114
UNA COMPUTADORA
116
Almacenamiento
134
GARANTÍA
139
More products and manuals for Unknown ReliOn
| Models | Document Type |
|---|---|
| Confirm |
Instruction Manual
 
ReliOn Confirm Instruction manual,
148 pages
|
© 2020, manymanuals.fr. Tous droits réservés | 0.066 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels