Satel INTEGRA Plus Spécifications télécharger pdf (Page 37)

SATEL INTEGRA Plus 35

Cash machine block delay [C.mach.blk.del.] – the time counted from the moment of

entering the user code of the C

ASH MACHINE ZONES BYPASSING

type. After expiry of this time,

the 24

ASH MACHINE

type zones will be bypassed.

Cash machine block time [C.mach.blk.time] – the time during which the 24

ASH MACHINE

type zones will be bypassed after entering the user code of the C

ASH MACHINE ZONES

BYPASSING

type. The bypass can be delayed by the C

ASH MACHINE BLOCK DELAY

Disarm delay – the parameter applies to the B

ANK VAULT

partition type. The partition will only

be disarmed after a defined period of time has elapsed since the code was used by the

user. If the time is equal to 0, the partition will be disarmed immediately.

Time to re-arm – the parameter applies to the B

ANK VAULT

partition type. After disarming, the

control panel will be analyzing for a defined period of time whether a door in the partition

will be opened by means of an access control module (partition keypad, code lock, etc.). If

the door is not opened, the partition will be automatically re-armed (the partition exit delay

countdown will not be running). If the time value is equal to 0, the partition will not be re-

armed. Irrespective of the preset value, if the D

ISARM DELAY

parameter is 0, the partition

will not be re-armed.

Options

Arm by two codes [2 cds to arm] – if this option is enabled, arming requires that codes be

entered in turn by two users.

Disarm by two codes [2 cds to d-arm] – if this option is enabled, disarming requires that

codes be entered in turn by two users.

Codes on two keypads [Codes on 2 kpd] – if this option is enabled and the partition is

armed/disarmed using two codes, they must be entered from different keypads.

Valid within 30 sec [1st code 30s] – if this option is enabled and two codes are required for

arming/disarming, the second user has to enter the code within 30 seconds of entering the

code by the first user.

Timer priority – if this option is enabled, arming/disarming is always done by the timer. If this

option is disabled, the timer will disarm the partition if it was armed by the timer (if it was

armed by the user, the timer will not disarm the partition).

Infinite exit delay [Infin.ex.time] – if this option is enabled, the partition will be armed after

entering the code and then:

– violating the 86. E

NTRY

XIT

– final,

87. E

XIT

–

FINAL

or 89. F

INISHING EXIT DELAY

type

zone;

– shortening of the exit delay time by the user (see E

XIT DELAY CLEARING

option).

If partition is not armed within 260 seconds, the "Arming failed" event will be registered to

the control panel memory. With the option enabled, the P

ARTITION EXIT DELAY

will be taken

into account, if the partition is armed using a zone or timer.

Exit delay clearing [Fin.exit time] – if this option is enabled, you can reduce the exit time

countdown by entering 9 from the keypad/partition keypad. The partition will be armed

immediately. The exit time clearing is only available from the same keypad/partition

keypad, from which the partition was armed (the E

XIT DELAY CLEARING ENABLE

option must

be enabled in the keypad).

Default block time – the option applies to the W

ITH TEMPORARY BLOCKING

partition type. If the

option is enabled and the D

EFAULT PARTITION BLOCK TIME

is preset, the partition will be

blocked on arming for a default time period, as defined by the installer (the blocking time

cannot be programmed by the user).

Alarm – disarm allowed – the option applies to the W

ITH TEMPORARY BLOCK

partition type.

During alarm, the partition can be disarmed by the users who do not have the A

CCESS TO

TEMPORARY BLOCKED PARTITIONS

right.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 81 82

Commentaires sur ces manuels

Pas de commentaire

Satel INTEGRA Plus Spécifications Page 37

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Satel INTEGRA Plus