Satel INTEGRA Plus Spécifications télécharger pdf (Page 56)

54 Programming SATEL

Output forcing T1 – you can indicate the output which will force the first temperature

threshold. If the output is active, the first temperature threshold will be active. When the

output is inactive, the control timers will decide which temperature threshold is active.

The output 256 cannot be indicated as the forcing one.

Timers controlling T1/T2 – you can indicate the timers which will control the temperature

threshold. When the control timer is ON, the second temperature threshold will be active

(unless the forcing output is active).

The user can edit the parameters of control timers using the T

IMERS

user function

available in the C

HANGE OPTIONS

submenu.

4.8 Output groups

Fig. 7. Window "Output groups" in the D

LOAD

X program.

The outputs of MONO

SWITCH

, BI

SWITCH

, R

EMOTE SWITCH

HUTTER UP

and S

HUTTER DOWN

type can be grouped by the function performed by them. Each group may be given a name.

The output groups can be defined:

 using the keypad, in the service mode, by means of the O

UTPUT GROUPS

function;

 using the D

LOAD

X program, in the "Output groups" window (to open the window, press the

"Output groups" button in the "Outputs" window).

If all outputs are assigned to one group of outptuts, the keypad will not display the list

of output groups upon starting the R

EMOTE CONTROL

user function, but it will

immediately display the list of outputs which can be controlled.

The output can be assigned to a few groups.

If the output is not assigned to any group, it cannot be controlled from the keypad.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 81 82

Commentaires sur ces manuels

Pas de commentaire

Satel INTEGRA Plus Spécifications Page 56

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Satel INTEGRA Plus